Melbourne Stucco Water Damage Repair |
Stucco Water Damage Repair, Melbourne, FLA house covered in stucco can be of absolute beauty. Many homeowners choose to use stucco because of the way it looks, and also because of its benefits. Stucco being a high-quality material is another reason which makes it last for a longer time. It is effective in hiding flaws, resists fungi, and are commonly equipped with thermo-regulating qualities. This ensures that the house stays cool during all seasons. Especially in Palm Bay, most houses include stucco.
Moreover, stucco prevents moisture and is water-resistant. But sometimes, stucco can be sensitive to water damage. Though many homeowners prefer stucco in their houses, it can have its downsides too. An early sign of water damage are bumps that are visible on the surface of the wall. If it is not repaired soon, the parts may crack and fall off, making the situation worse. The first step towards the water damage is to determine what kind it is. You can consult a professional from our team to ask on ways to conduct a moisture test or leak test to check the intensity of the damage and to check from where the water is coming from. Here at Melbourne, we have our dedicated team of professionals who could perform the tests and give you the best solution for the same. The stucco professional will then dig out the root cause of the damage and suggest a treatment. So, what could be the major causes of stucco water damage
Improper Stucco Installation
It does not matter how good quality the stucco is, but if it is not installed properly, it will result in water damages and other issues. Stucco consists of three coats, which are a brown coat, a scratch coat, and a finish coat. If any of these coats are disturbed, it will result in many problems later on. Similar problems may arise while installing stucco directly on to a wooden surface too.
Incorrect Stucco Compositio
The strength of the stucco comes from a great composition of water, sand, and Portland cement. Every ingredient in the stucco should correspond to the specifications set by the National Institute of Standards and Technology of the Department of Commerce. Another important fact is that the mixture must be completely cured before application. Incorrect composition or curing will result in future water damages, cracks, and leaks.
|
|